Training
Build internal metrology capability
20 metrology training courses and QMS training for ISO standards, delivered by an experienced AIMS metrology trainer.
Who should attend
- Calibration engineers and technicians
- Planning engineers and decision makers
- Equipment inventory in-charges
- Equipment sales and purchase engineers
- Precision measurement equipment dealers
What your organization gains
- Fine tuning of operations and systems through accurate measurements
- Enhanced confidence in measurement standards and systems
- Fewer operational mistakes with expensive consequences
- Better measurement and monitoring of OHSE activities
- More reliable QC inspection and testing of raw material and finished goods
Training objectives
Courses build an appreciation of the concepts related to:
- World metrology structure and traceability
- Specifications and calibration results of measurement standards
- Measurement principles, methods and procedures
- Calibration methods and techniques
- Best measurement practices
About the trainer
- 20+ years of national and international experience in metrology
- Attended a number of metrology trainings in Pakistan and abroad
- Provided training to organizations in the Middle East and Pakistan
- Worked as a technical assessor with PNAC, ENAS and GAC
- Headed a number of ISO/IEC 17025 accredited laboratories in the Middle East and Pakistan
Metrology training courses
Each course runs for one or two days. Open a course outline to see the topics covered.
Metrology fundamentals
Why Calibrate a Measuring Instrument
A short course giving general awareness of the importance of measurement and calibration.
Course outline (16 topics)
- Measurement in everyday life
- Measurement system hierarchy
- Measurement traceability
- Brief history of measurement
- Concept of calibration
- Accuracy ratio and test uncertainty ratio
- Calibration and legal metrology
- Calibration and industrial metrology
- Why go for accredited calibration?
- How to define acceptance criteria
- How to define the re-calibration interval
- How to select a calibration laboratory
- How to read a calibration certificate
- How to use calibration certificate information
- How to use and maintain a measurement standard
- Management of an in-house calibration system
An Introduction to Metrology
An advanced-level course on the concepts of industrial, legal and scientific metrology for people involved in calibration.
Course outline (20 topics)
- Definition of metrology
- Measurement in the global marketplace
- Development and concerns of metrology
- Need for better measurements
- History of measurement
- System of units
- Base units of the SI system
- Derived units of the SI system
- Elements of a measurement system
- Branches of metrology
- Fields of metrology
- Standards and standardization
- Vocabulary of measurement terms
- Managing the metrology system
- Making good measurements
- Concepts of calibration
- Justification for calibration
- Interpretation of calibration results
- Accredited calibrations
- Ensuring the validity of calibrations
Pressure, temperature and humidity
Precision Pressure and Vacuum Measurement
Pressure measurement principles, measuring instruments, calibration standards and how to avoid the associated errors.
Course outline (15 topics)
- Pressure definition and formulae
- Scope of pressure measurement
- Principles of pressure measurement and calibration
- Absolute, gauge and differential pressure
- Pressure units, terminology, traceability and standards
- Types of pressure instruments and standards
- Primary pressure standards (dead weight piston gauges)
- Secondary pressure standards
- Field pressure instruments
- Vacuum measurement standards
- Factors affecting the accuracy of DWT piston gauges and significant sources of error
- Errors associated with portable calibrators
- Uncertainty in pressure calibration
- Accuracy of pressure measuring instruments and standards
- Pressure calibration good practice and principles
Temperature Metrology Concepts and Calibration
Temperature measuring principles and instruments, with the emphasis on avoiding common errors.
Course outline (17 topics)
- Temperature measurement: an introduction
- Scope of temperature measurement
- Physical laws governing heat and temperature phenomena
- Temperature scales: definition and inter-conversion
- ITS-90 temperature scale
- Conduction, convection and radiation
- Contact and non-contact thermometers
- Principles of temperature measurement
- Mapping of environmental chambers and cold stores
- Reference and comparison calibration of temperature standards
- Characterization and tolerance testing of temperature sensors
- Types of temperature sensors and instruments
- Errors associated with temperature sensors
- Temperature indicators and transmitters
- Temperature mediums and associated errors
- Budgeting of temperature measurement errors
- Best measurement practices in temperature
Humidity Measurement Concepts & Calibration
For professionals who use humidity measuring devices or need to understand measurement, calibration and the use of humidity instruments and standards in their daily tasks.
Course outline (16 topics)
- Introduction to humidity
- Scope of humidity measurement
- Hygrometric definitions, units, terminology and traceability
- Physical laws governing humidity measurements
- Principles of humidity measurement
- Types of humidity sensors
- Types of hygrometers used in industry
- Mapping of environmental chambers and cold stores
- Humidity calibration reference standards
- Salt standard solutions
- Climatic chambers
- Two-pressure and two-temperature chambers
- Errors associated with humidity calibration
- Budgeting of humidity errors
- Best measurement practices in humidity
- Practical advice on applications
Mass, force and torque
Precision Mass Metrology & Weighing Scale Calibration
An understanding of weighing machines and mass standards, covering mass classification, mass standards, calibration procedures and environmental influences.
Course outline (17 topics)
- Introduction to mass metrology
- Scope of mass measurement
- Standardization in mass metrology
- Future of the kilogram
- Traceability in mass metrology
- Technical requirements for precision mass standards
- Care and use of mass standards
- Principle and types of weighing scales
- Double pan and single pan weighing scales
- Electronic weighing scales
- Precision mass comparators
- Weighing with an electronic balance
- Work room, work bench and other prerequisites
- Terms used to describe balance operation
- Quantification of errors associated with balance operation
- Budgeting the error for balance calibration
- Budgeting the error for mass calibration
Force Metrology and Calibration of Load Cells
A refresher on force metrology with particular emphasis on measurement principles, techniques and transducers, and avoiding the associated errors.
Course outline (20 topics)
- Introduction and scope of force measurement
- Newton's laws of force and motion
- Forces at work in nature
- Manifestation of force as stress, pressure, weight, torque and work
- Realization of the force unit
- Stress vs. strain and modulus of elasticity
- Force measuring principles and force transducers
- Ring dynamometers and proving rings
- Hydraulic and pneumatic load cells
- Electromechanical load cells
- Strain gauge electronic load cells
- Choosing a force measuring system
- Load cells as secondary force measurement standards
- Load cell measuring circuits and indicators
- Traceability in force measurement
- Universal force calibration machines
- Compressive and tensile testing machines
- Force measurement terminologies
- Budgeting of errors in force metrology
- Best practices in force metrology
Torque Measurement and Calibration
Torque concepts with particular emphasis on the calibration and maintenance of torque tools.
Course outline (18 topics)
- Introduction and concepts of torque measurement
- Static and dynamic torque measurement and torque units
- Scope of torque measurement
- Types of hand torque tools
- Type I and II torque tools
- Type III and IV torque tools
- Torque wrench extensions and multipliers
- Power torque tools
- Calibration of static torque tools
- Torque tool calibrators
- Torsion bar strain gauge torque transducers
- Torque calibration techniques
- Torque calibration procedures
- Torque application tips
- Torque terms and definitions
- Calibration of torque calibrators and primary standard torque
- Sources of error in torque tool calibration
- Budgeting of errors in torque calibration
Volume, level and flow
Precision Measurement of Volume in Analytical Labs
Improves the volumetric measuring techniques of chemical and biological lab technicians and makes them proficient in in-house calibration of pipettes and glassware.
Course outline (14 topics)
- Definition and scope of volumetric measurement in analytical labs
- Volumetric standards and traceability of measurement
- Volumetric glassware material and classification
- Volumetric flask, pipette and burette
- Single volume and graduated glassware and associated errors
- Operating temperatures and other systematic errors
- Tips for correct use of volumetric glassware
- Glassware calibration through the proving method
- Gravimetric calibration method and equations
- Factors affecting gravimetric calibration
- Quantification of measurement errors
- Budgeting of major error sources
- Verification of POVA and calculation of random and systematic errors
- Best measurement practices for volumetric glassware
Pipetting Techniques for Precise Volume Measurement
For analysts in analytical labs and geotechnical or chemical lab technicians who need to learn correct pipetting techniques.
Course outline (17 topics)
- Pipettes as small volume dispensers
- How pipettes work
- Positive displacement and air displacement
- Why seal integrity is important
- Hydrostatic pressure and spring mechanism
- Mechanics of the piston cylinder
- Pipette design and types
- Serological pipettes
- Proper pipette ergonomics
- Periodic cleaning and maintenance
- Pipetting techniques
- Forward and reverse pipetting
- Pipette calibration and traceability
- Pipette acceptance criteria and verification interval
- Errors in pipette calibration
- Budgeting of errors and uncertainty of measurement
- Best measurement practices
Level Measurement Techniques for Process Industry
A refresher for process designers, maintenance engineers and calibration technicians on the available level measurement techniques and the comparative advantage of each.
Course outline (15 topics)
- Introduction to level measurement
- General scope of level measurement
- Primary principles of level measurement
- Level measurement techniques, available devices and selection of the best method
- Point and continuous level measurement
- Mechanical methods: float and board, and displacer gauges
- Hydrostatic level measurement
- Ultrasonic and microwave level transmitters
- Conductance and capacitance level gauging
- Gamma ray, laser and magnetostrictive level sensors
- Gravimetric level gauging using load cells
- Comparison of level measurement techniques
- Specialty level switches
- Calibration of level measuring instruments
- Best measurement practices in level measurement
Fluid Flow and Calibration of Flow Meters
Fluid flow measurement techniques, instrumentation and the errors involved in metering and custody transfer.
Course outline (17 topics)
- Introduction to fluid flow measurement
- Units of flow measurement
- Orientation to flow measurement principles
- Factors affecting the flow variable
- Volume and weight flow conversions
- Standard and actual flow measurements
- Flow meter K factors and other flow constants
- Classification of quantity and rate meters
- DP flow meters: orifice, venturi, nozzle and pitot tube
- Mechanical flow meters: positive displacement, turbine and propeller
- Electronic flow meters: magnetic, vortex and ultrasonic
- Mass flow meters: Coriolis and thermal
- Effects of flow conditions and flow stream temperatures
- Flow profiles and straightening devices
- Flow meter selection and sizing
- Flow calibrator for liquid flow
- Flow calibrator for gas flow
Dimensional, electrical and time
Dimensional Metrology and Tools Calibration
For people who use measurement tools or need to understand measurement, calibration and the use of measurement techniques in their daily tasks.
Course outline (20 topics)
- Introduction to dimensional metrology
- Scope of dimensional measurements
- Brief history of dimensional measurement
- Dimensional metrology and the SI system of units
- Definition and realization of the metre
- Dimensional metrology measurement principles
- Line standards and end standards
- Sub-fields in dimensional metrology
- Traceability in dimensional metrology
- Gauge block classification and uses
- Non-precision and precision dimensional tools
- Linear measurement tools and their correct usage
- Precision angular measurement
- Roundness measurement tools and handling of the test item
- Straightness, squareness and parallelism measurement
- Automated gauging machines
- Mechanical, pneumatic and optical gauging comparators
- Factors affecting linear measurement
- Quantification and budgeting of dimensional measurement errors
- Good measurement practices in linear measurement
Precision Electrical Measurement
Theory and techniques for calibrating electrical measuring instruments (DC and low frequency), with the emphasis on the practical aspects of electrical calibration.
Course outline (15 topics)
- Introduction to AC/DC low frequency metrology
- Scope of electrical measurements
- Physical laws forming the basis of measurement instruments
- Electrical terms and definitions
- Measurement methods commonly employed
- Electrical units of measure, realization and traceability
- Electrical safety while using electrical measuring instruments
- Reference electrical calibration standards
- Calibration of analogue and digital multimeters
- Calibration of process indicators and simulators
- Calibration of insulation and earth resistance meters
- Calibration of LCR meters
- Common errors in electrical measurement
- Quantification and budgeting of measurement errors
- Measurement best practices
Time, Frequency and RPM Measurement
Techniques for calibrating time, frequency and RPM measuring instruments.
Course outline (17 topics)
- Introduction and scope of time, frequency and RPM measurement
- Basic terms and definitions
- Realization of the SI base unit of time
- Primary standard for time and frequency
- Frequency and time period
- RPM measuring tools
- Methodology used in frequency calibration
- Direct comparison method for stopwatches
- Totalization method of calibration
- Type I and type II stopwatches
- Calibration of frequency measurement instruments
- Errors in frequency calibration
- Phase deviation and frequency offset
- Temperature stability comparison of frequency generators
- Model equation of measurements
- Quantification and budgeting of calibration errors
- Measurement best practices
Calibration of Power and Energy Meters
Working principles of power and energy meters, their calibrators, and techniques for good measurement.
Course outline (17 topics)
- Introduction to power and energy measurement
- Scope of power and energy measurement
- Underlying principles of measurement
- Terms and definitions in power measurement
- Power factor, active and reactive power
- Improving the power factor through capacitor banks
- Single phase and three phase power
- Power meter calibrators
- Safety precautions for power measurement
- Characteristics of power cables, connectors and terminations
- Power sensors and watt meters
- Cal factor for power sensors
- Power sensors: theory and operation
- Typical instrument hook-up for power measurement
- Energy meter calibrator and hook-up
- Common measurement errors and budgeting
- Measurement best practices
Acoustics and vibration
Acoustic Noise and Vibration Metrology
The basics of sound and vibration measurement and the techniques used to calibrate noise and vibration survey meters.
Course outline (18 topics)
- Sound as a form of energy and units of measurement
- Relationship between sound level and pressure
- Basic types of sound field microphones
- Procedure for sound level meter calibration
- Addition and subtraction of sound levels
- Introduction to vibration and its sources
- Scope of vibration measurement in OHS
- Vibration analysis as a diagnostic tool for rotating machinery
- Vibration parameters: displacement, velocity and acceleration
- Selection and measurement of the most suitable parameter
- Working principle of velocity pickups and accelerometers
- Electric charge and voltage inter-conversion for a piezoresistive sensor
- Components of a calibration system and techniques
- Calibration frequency response
- Vibration pickup mounting techniques
- Characteristics of interconnecting cables and connectors
- Mass loading, ground isolation, ground noise and ground loops
- Calibration results and calibration certificates
Measurement uncertainty
Measurement Uncertainty Calculation (Basic)
A basic-level course on measurement system errors and uncertainties, with the emphasis on developing simple uncertainty budgets.
Course outline (17 topics)
- Definition of measurement uncertainty
- Accuracy and precision
- Best estimate of a measurement result
- Standard deviation and spread of results
- Calculating the spread of a measurement result
- Sources of measurement errors and uncertainties
- Classification of measurement system errors
- Probability distribution or shape of measurement error
- Steps for evaluating uncertainty components
- Combining the individual uncertainties
- Applying a coverage factor to raise the level of confidence
- Preparing a sample uncertainty budget
- Reporting the result of a measurement
- Using reported results to check compliance with specifications
- Reducing measurement uncertainties
- Good measurement practices
- What is not included in the basic course
Advanced Calculation of Uncertainty of Measurement (GUM Approach)
For professionals who perform or manage critical measurement and calibration tasks and need to evaluate the measurement uncertainties associated with their results.
Course outline (16 topics)
- Defining the measurement model with output and input estimates, and developing the general error model
- Overview of the error model for different calibration scenarios
- Calculating the calibration correction from significant (systematic) error sources
- Calibration uncertainty as the square root of the variance of the calibration correction
- Variance addition rules for different mathematical operations
- Type A and Type B approaches to uncertainty calculation
- Standard deviation and Type A measurement uncertainty
- Probability distribution, containment limits and degrees of freedom for Type B
- Sensitivity coefficient for each input estimate
- Contribution from component uncertainties
- Correlation coefficient between the input estimates
- Combining correlated and uncorrelated input uncertainties
- Effective degrees of freedom for combined uncertainty
- Expansion coefficient from the Student's t distribution table for 95% confidence level
- Calculating the expanded uncertainty at the required confidence level
- Reporting requirements for the measurement result and associated uncertainty
Uncertainty of Measurement for Analytical Measurements (CITAC CG 4 Approach)
The approach used in testing laboratories to calculate uncertainty from method validation studies, quality assurance data (PT, ILC) or in-house repeatability and reproducibility data.
Course outline (18 topics)
- Scope and field of application
- Analytical measurements and uncertainty
- Customer requirements for uncertainty and method
- Concept of traceability in analytical measurements
- Specification of the measurand
- Method validation equations and experimental studies
- Identification of error sources, fishbone diagram and quantification of input uncertainties
- Relevance of prior studies
- Certified reference materials
- Using prior collaborative method development and validation data
- Estimation of individual uncertainty components
- Estimation based on other results or data
- Modelling from theoretical principles
- Estimation based on judgement
- Significance of bias
- Standard and combined uncertainties
- Expanded uncertainties and reporting of results
- Compliance against limits
QMS training
AIMS offers comprehensive training for the following ISO standards, each at three levels.
Standards covered
- ISO/IEC 17025:2017
- ISO/IEC 17020:2012
- ISO 9001:2015
- ISO 14001:2015
- ISO 45001:2018 (replaces OHSAS 18001:2007)
Three levels
- Level I: Awareness of the general requirements of the standard.
- Level II: Implementing the standard in an organization.
- Level III: Internal auditing of the standard.
Additional ISO/IEC 17025 courses
- Implementing internal quality control measures
- Planning and performing method validation
- Calculating measurement uncertainty
Courses are scheduled on request. Contact us for dates and fees, or for a program tailored to your team through metrology consultancy and QMS consultancy.
Schedule training