Skip to main content
Al Meezan Industrial Metrology ServicesAl Meezan Industrial Metrology Services — Your Partners in growth.

Capabilities

Accredited calibration scope

Ranges and uncertainties above are summarised from the PNAC Lab 131 accredited scope. For contractual work, use the signed scope PDF as the authoritative CMC.

Download accredited scope PDFView certificate
DisciplineLocationAccredited ranges (summary)Uncertainty notes

Pressure Measurement & Sourcing

Pressure gauges, transducers, recorders and related instruments — laboratory and on-site scopes.

SOP: DKDR6-1. Dead-weight tester, reference gauges & loggers.

both
  • −0.600 bar to 0.000 bar
  • 0.000 bar to 2.000 bar
  • 2.001 bar to 6.000 bar
  • 6.001 bar to 60.000 bar
  • 60.100 bar to 1000.000 bar (lab); on-site to 700.000 bar per scope
  • From ±0.0003 bar (low range) up to ±0.15 bar (high range) — see scope PDF

Temperature Measurement

Digital thermometers, liquid-in-glass, dial gauges, dry-block calibrators, baths, IR thermometers, chambers and furnaces.

SOPs include DKD R5-1, ASTM E77, BS EN 13190, EURAMET cg-13, ASTM E2488, DKD-R 5-7.

both
  • Digital thermometers: −40 °C to 650 °C
  • Liquid-in-glass: −10 °C to 350 °C
  • Dial gauges: −20 °C to 350 °C
  • IR thermometers: 50 °C to 500 °C
  • Environmental chambers: −40 °C to 300 °C (on-site)
  • Temperature furnaces: 50 °C to 1100 °C (on-site)
  • Typical expanded uncertainties from ±0.05 °C (digital) upward by range — see scope PDF

Mass Measurement

Mass standards and weighing instruments — F1/F2/E2/M1 class work as listed in scope.

SOP: NIMT CP-301 / EURAMET cg-18 as applicable.

both
  • Laboratory masses: 1.00 mg to 20.000 kg
  • On-site weighing: 0.0010 g to 200.00 kg (by instrument class)
  • From ±0.025 mg (mg range) to kg-level CMC on industrial scales — see scope PDF

Volume Measurement

Glassware and volume measuring / dispensing devices.

SOP: ASTM E542-01.

laboratory
  • 1 mL to 1000.0 mL (selected fixed and continuous ranges)
  • From ±0.0010 mL (1 mL) to ±0.6 mL (up to 1000 mL) — see scope PDF

Electrical Measurement (Sourcing & Measuring)

DC/AC voltage and current, resistance, capacitance, insulation resistance, high voltage, and related electrical instruments.

SOP family TM/LCP/E-01, E-02, E-05; multiproduct calibrator & precision DMMs.

Lab / On-site (Hi Volt)
  • DC voltage: 1.00 mV to 1000.0 V
  • AC voltage @ 50 Hz: 1.00 mV to 1000.0 V
  • DC / AC current: 1.00 mA to 10.00 A (direct); clamp-on to 1000 A
  • Resistance: 1.00 Ω to 100 MΩ
  • Capacitance: 0.01 nF to 1.000 µF
  • Insulation resistance @ 1 kV & 5 kV: 10.000 MΩ to 10.00 GΩ
  • AC Hi Volts @ 50 Hz: 0.5 kV to 40.0 kV
  • DC Hi Volts: 1.0 kV to 40.0 kV (scope pages list up to 8.0 kV on some on-site rows)
  • CMC values vary by range — see accredited scope PDF for expanded uncertainties

RPM & Time

Tachometers, rotational speed indicators, and stopwatches / timers.

SOP: TM/LCP/E-02, AIMS-TM-LCP-E-002, NIST 960-12.

both
  • RPM (sourcing/lab): 1.0 RPM to 99999 RPM
  • RPM (onsite measurement): 5 RPM to 6000 RPM
  • Time: 1 s to 3600 s
  • RPM from ±0.058 RPM; time ±0.50 ~ 1.0 s — see scope PDF

Dimensional Measurement

Length, diameter, thickness and depth — micrometers, dial indicators, verniers, rules and laser distance meters.

SOP: AIMS-TM-LCP-D-04; gauge blocks Grade 0 and check sets.

both
  • General dimensions: 1 mm to 50 m
  • Length & outer diameter (precision): 0.100 mm to 50.00 mm
  • From ±1.42 µm (precision) to ±1.50 mm (long length) — see scope PDF

pH, Conductivity & Spectrophotometry

pH meters, conductivity meters, and spectrophotometers (wavelength, transmittance, absorbance).

SOP: TM/LCP/ITS-09, ITS-010, ASTG-4 IANZ / AIMS-TM-WI-S-01.

both
  • pH: 4.00 to 10.01 pH
  • Conductivity: 1.413 mS and 12.880 mS (buffer points)
  • Wavelength: 285.0 nm to 640.0 nm
  • Transmittance: 8.10 %T to 57.40 %T
  • Absorbance: 0.240 A to 1.090 A
  • pH ±0.001 ~ 0.016; conductivity and optical CMC per scope PDF

Need a formal capability summary for a supplier audit? Contact us with your checklist, or attach the scope PDF from Credentials.

Request quote
CallWhatsAppQuote